The ESP-Prog is an official development tool designed by Espressif to make programming and debugging their chips effortless. It is based on the powerful FT2232HL dual-channel bridge chip. Channel 1 is dedicated to JTAG debugging, while Channel 2 handles Serial Program Downloading.
If you are tired of the “failed to connect” errors on cheap serial adapters or need to step through your code line-by-line using OpenOCD or GDB, the ESP-Prog is an essential addition to your workbench.
Key Features
Dual Functionality: Provides both high-speed JTAG debugging and automatic serial firmware flashing on a single board.
Automatic Bootloading: Features the specialized transistor circuit that automatically puts the controller into “Download Mode”—no manual button pressing required!
Multiple Connector Options: Comes equipped with both 1.27mm and 2.54mm pitch headers to support various development board types.
Voltage Selection: Easily switch between 3.3V and 5V power output via onboard jumpers to suit your target board.
Plug-and-Play Compatibility: Works seamlessly with official Espressif tools like ESP-IDF, as well as Arduino IDE and PlatformIO.
Technical Specifications
Feature
Specification
Interface Chip
FT2232HL (Dual High-Speed USB to UART/FIFO)
Interface Port
Micro-USB
JTAG Interface
10-pin (1.27mm pitch) / 6-pin (2.54mm pitch)
Program Interface
6-pin (1.27mm pitch) / 6-pin (2.54mm pitch)
Output Voltage
3.3V or 5V (Selectable)
Supported Chips
ESP32, ESP8266, ESP32-S2/S3/C3/C6
Status LEDs
Power, TXD, RXD indicators
Reviews
There are no reviews yet.
Be the first to review “ESP-Prog Program Downloader & JTAG Debugger – Automatic Firmware Flasher for amp in Pakistan”Cancel Reply
Lolin D32 Pro V2.0.0 ESP32-WROVER Development Board₨ 1,500
Reviews
There are no reviews yet.